OK, so I'm still seeing the same issue. I loaded the bin you posted, after checking to make sure the bin you posted had all the changes made that you said to make. Uploaded it to the PCM and connected with TunerproRT, using the same ADX.
The values for key-off, engine off are:
MAP : 10.35
Raw 2BAR MAP: 8.8
Raw 3BAR MAP: 3.6
Barometric: 10.35
The key-on, engine-off values are:
MAP: 53.53
Raw 2BAR Map: 8.8
Raw 3BAR Map: 3.6
Barometric: 53.16
some key-on, engine-trying-to-run values are:
Ran a few seconds with a lot of throttle help:
1600RPM
10.59* spark advance
MAP: 23.27
Raw 2BAR Map: 8.8
Raw 3BAR Map: 3.6
Barometric: 53.16
1400RPM
12* spark advance
MAP: 29.17
Raw 2BAR Map: 8.8
Raw 3BAR Map: 3.6
Barometric: 53.16
There are more values in the (admittedly very short) log attached.
I'm also still having the datastream corruption. Still happens about the same rate-1 in 12 connections seems clean and corruption free.
Bookmarks