HistoryStamp, something did not work correctly with your picture? It's a red x?
MudBuggy. There are three things/files you need in TP for your ECM in order below. The forth is Data Log. It is something you create from your engine because of the files you loaded into TunerPro. Actually you can create a data log with just the ADX. But to make changes in your chip you need to change the file burned into the chip called the "BIN file, extension .bin" The mask/XDF is like a program so you can do so in relatively English, not looking for and changing hex. This is what a bin file looks like on a chip.
Where in there would you increase idle? Now there are guys here that know how to do this but still use TunerPro because it simplifies the changes.
CHIP: .bin extension. This is the ASDU.bin TunerPro, File, Open Bin. Choose your bin you downloaded and saved. Now your bin is loaded in TunerPro.
MASK: .xdf file extension. This is $42-1227747-V3.XDF TunerPro still open, XDF, select your xdf you downloaded and saved, now your mask is loaded in TunerPro. You can now make changes to your chip/bin file.
SCANNER: .adx file extension. This is $42-1227747-V3.ADX TunerPro still open, Acquisition, Load Definition file you downloaded and saved . Now your acquisition file is loaded in TunerPro. You can now record data from car. Or play back a data log if you do next step.
DATA LOG: .xdl file extension. This is the file with XDL TunerPro still open, Acquisition, Load Log file.
You may be confusing a couple files I have a lot of work into and the ended up at Version 3 (V3) the name could be simply $42.xdf this is the mask number for that ECM. 1227727 is the ECM number. Hence the ending name I gave it $42-1227747-V3 there is an ADX and XDF. I named them specifically the same because they also have a lot of work in them together with a feature of TunerPro called data Tracing...
OK with tunerPro open go to File, Open BIN. "BIN"
Then, XDF, Choose "XDF"
Then, Acquisition, Load Definition File. "ADX"
Then, Acquisition, Load Log File, "XDL"
Bookmarks