Results 1 to 15 of 48

Thread: Base Tune or close to spec tune for 0411 SBC406AFR-HSR

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    Dec 2014
    Age
    41
    Posts
    61

    Base Tune or close to spec tune for 0411 SBC406AFR-HSR

    Hi Guys,

    I seem to have backed myself into a bit of a corner by not doing enough research and trying to find the cheapest route to tuning.
    I went and bought an AVT-852 cable thinking I could use it with a copy of EFI Live I had with a demo serial that allows editing and saving etc, but was sadly mistaken.

    Since then I've found I can use TunerPro and LS1 Flashtool in conjunction with Dimented's XDF files etc to edit, save and flash .BIN files to the PCM, hooray!

    But I'm still out of my depth. I actually built the motor trying to mirror a lot of the common builds on thirdgen.org in hopes I could find a tune file that matches mine close enough to upload and drive until I can afford to take the car to a tuning shop, but haven't been able to find anyone with access to their own tune in .bin format.

    If anyone can point me towards a better .BIN file to use as a base, or has a .BIN file that is close to my specs I'd be very appreciative, or even point me in the direction of a good mail order tune place, or even better, a tutorial or guide to tuning using the TunerPro OBD2 software:)



    406 SBC
    approx. 10.5:1 Compression
    XE270HR Cam (12-422-8)
    AFR 195 comp heads, heavily ported 64cc
    HSR Intake with 58mm Arizona Speed Marine Throttle body
    30lb/hr injectors
    Vortec dizzy
    x24 OBD2 setup
    0411 PCM (from 2001 Holden Commodore VX Calais LS1)
    4L60E transmission
    2.77 9-bolt rear

    VATS Disabled
    Engine Cylinder displacement adjusted

    Also not sure what do to here for the firing order change from LS1 to SBC, why is channel 01 =15?, and how do you change the bank order?
    Last edited by evilstuie; 06-16-2015 at 02:42 PM.

Similar Threads

  1. 454 with 350 tune
    By myburb in forum GM EFI Systems
    Replies: 1
    Last Post: 06-05-2015, 01:15 AM
  2. MAF tune
    By itsonlyanlt1 in forum TunerCat OBDII
    Replies: 8
    Last Post: 08-03-2014, 04:57 AM
  3. Help me for Tune for this set up ????
    By camy1993 in forum TunerPro Tuning Talk
    Replies: 1
    Last Post: 07-22-2014, 02:30 AM
  4. Disable AE and PE and O2 sensor for base tune
    By 95GMC_sierra in forum TunerPro Tuning Talk
    Replies: 7
    Last Post: 05-20-2014, 01:47 AM
  5. Need help with a tune
    By 1leg in forum GM EFI Systems
    Replies: 3
    Last Post: 02-26-2013, 06:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •