Results 1 to 1 of 1

Thread: WTB Lower Throttle Body housing for IAC. 2 Torx screws hold IAC. 1990-1996 Chev V-8

  1. #1
    billygraves
    Guest

    WTB Lower Throttle Body housing for IAC. 2 Torx screws hold IAC. 1990-1996 Chev V-8

    WTB TWO Lower Throttle Body IAC housings from Chevrolet V-8 TPI from 1993-1997 Coolant passage will not be used.
    Chevrolet V-8 Port Fuel injection 5.0/5.7L This housing has the IAC screwed in with two Torx screws and is sealed with an O-ring. The connector is 4 pin flat for the IAC.
    (I don't need the Black Screw in IAC housings with the 4 pin square weather pack connector, used in Chev V-8 1985-1989?? 5.0/5.7L Port Fuel Injection) I pay shipping. Pay Pal OK. Thanks for looking
    Last edited by billygraves; 06-07-2015 at 06:23 AM. Reason: Updated

Similar Threads

  1. Shut up CCM and Dash updates on 1990 Y Body
    By captainkawasaki in forum GM EFI Systems
    Replies: 30
    Last Post: 11-21-2018, 10:43 PM
  2. 7.4 throttle body part#?
    By jimbo in forum GM EFI Systems
    Replies: 2
    Last Post: 01-12-2015, 09:07 PM
  3. 1990 Corvette (Y Body) ADX File?
    By C4ProjectCar in forum GM EFI Systems
    Replies: 6
    Last Post: 12-08-2014, 09:30 PM
  4. holley throttle body
    By bonnieclyde100 in forum Introductions
    Replies: 12
    Last Post: 03-22-2013, 10:21 AM
  5. MPI throttle body options
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 43
    Last Post: 01-19-2012, 03:57 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •