Gathering parts and knowledge to inject my 69 Camaro. Having a blast and learning a lot. Thanks
Gathering parts and knowledge to inject my 69 Camaro. Having a blast and learning a lot. Thanks
I just completed the gathering of TBI parts for my 69 Camaro.
What ECM are you using? 1227747?
what engine and build do you have?
1986 ski centurion boat, 351W, gt40P heads, edelbrock performer rpm, 1227747 ecm, 72 lb/hr injectors (@18 PSI fuel pressure), .490/.490 lift, intake 278 duration, exhuast 282 duration, 112 lobe separation
1969 camaro, 355ci, performer RPM intake, camel hump heads, 1227747 ecm, 454 throttle body (@18 PSI fuel pressure),
2016 Chevy Cruz
2014 Chevy Silverado
I also just collected all my TBI parts, 1988 GMC Van with a 747 ecm. I am building a gen 1 350 with 441 heads, 9.1 comp, TBI intake, a mild roller cam(something the TBI will get along with) and 700r4.
Where are you going to mount the ECM?
1986 ski centurion boat, 351W, gt40P heads, edelbrock performer rpm, 1227747 ecm, 72 lb/hr injectors (@18 PSI fuel pressure), .490/.490 lift, intake 278 duration, exhuast 282 duration, 112 lobe separation
1969 camaro, 355ci, performer RPM intake, camel hump heads, 1227747 ecm, 454 throttle body (@18 PSI fuel pressure),
2016 Chevy Cruz
2014 Chevy Silverado
It will be awhile before I mount it. I am thinking glove box aor possibly the console. What cam are you going to run? I am going roller but I know you cannot get too wild as the MAP needs to see a good vacuum signal to operate correctly.
Posting Permissions
Reply With Quote
Bookmarks