What If? $8D (1227727 ECM) for TBI

[dave w]

I have a few spare V8 7427 tbi memcals that are all workig. It would be quicker and cheaper just to tell/show me exactly what pins to connect and I will add a jumper wire to one and give it another test. I dont think a faulty memcal would be good to test this with.
Just snap me a picture and draw arrows pointing to the exact pins that need connected together and I will do it.

I'm working on figuring out how to get pin 53 to 5.0 VDC. The pics below are from some of my research over at Thridgen.org. I think the challenging part is 2/3 VRFD (3.3 VDC) for alternating TBI, and have 3.3 VDC to the cylinder select without an error.

Post #39 at ThridGen.org http://www.thirdgen.org/techboard/di...-resistor.html

dave w