Results 1 to 3 of 3

Thread: first chip engine still not running maybe bad IAC please look at log

  1. #1
    Fuel Injected!
    Join Date
    Jan 2015
    Location
    Elkview,wv
    Posts
    48

    first chip engine still not running maybe bad IAC please look at log

    hello I burned my first chip and the engine wants to start but when I tried to data log engine wouldn't hit at all please look at my log advice is greatly appreciated thank you...

    383 stroker 95 454 tbi

  2. #2
    Fuel Injected! jim_in_dorris's Avatar
    Join Date
    Dec 2011
    Posts
    803
    Grease, what ECM are you using? have you tried a stock prom? It won't run well, but should start.
    Square body stepsides forever!!!

  3. #3
    Fuel Injected!
    Join Date
    Jan 2015
    Location
    Elkview,wv
    Posts
    48
    Hello I'm running $0D. 7427.

    Street fire coil, timing iis dead on put my finger over the #1 plug and cranked until it blew my finger out and lined it up to 0 degrees,

    it could be 1 of 2 things.....IAC. I did the reset tbi test and IAC did not extend or retract found two blue iac wires A-high/Low the voltage was reversed coming out of the ecu per the schematic realy weird.. I do have the 454 iac adapter plug..

    also I bought a cheap $60 Efi distributor off of eBay..

    Engine was trying to start sounded like only 4 cylinders were firing and then a loud backfire. Any ideas where I can search for what

    tables,to change a guide if you will for a 383 with 454 tbi? Any help is greatly appreciated...

Similar Threads

  1. Replies: 10
    Last Post: 04-22-2015, 06:28 AM
  2. Replies: 52
    Last Post: 11-08-2014, 02:24 AM
  3. Replies: 58
    Last Post: 08-07-2013, 09:20 PM
  4. Chip Offsets stock chip?
    By POZE in forum GM EFI Systems
    Replies: 14
    Last Post: 01-28-2013, 02:06 AM
  5. TPI Engine Running
    By dave w in forum GM EFI Systems
    Replies: 2
    Last Post: 06-29-2011, 05:58 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •