hello I burned my first chip and the engine wants to start but when I tried to data log engine wouldn't hit at all please look at my log advice is greatly appreciated thank you...
383 stroker 95 454 tbi
hello I burned my first chip and the engine wants to start but when I tried to data log engine wouldn't hit at all please look at my log advice is greatly appreciated thank you...
383 stroker 95 454 tbi
Grease, what ECM are you using? have you tried a stock prom? It won't run well, but should start.
Square body stepsides forever!!!
Hello I'm running $0D. 7427.
Street fire coil, timing iis dead on put my finger over the #1 plug and cranked until it blew my finger out and lined it up to 0 degrees,
it could be 1 of 2 things.....IAC. I did the reset tbi test and IAC did not extend or retract found two blue iac wires A-high/Low the voltage was reversed coming out of the ecu per the schematic realy weird.. I do have the 454 iac adapter plug..
also I bought a cheap $60 Efi distributor off of eBay..
Engine was trying to start sounded like only 4 cylinders were firing and then a loud backfire. Any ideas where I can search for what
tables,to change a guide if you will for a 383 with 454 tbi? Any help is greatly appreciated...
Bookmarks