Results 1 to 3 of 3

Thread: How do I get the MAP Low (34) and MAP High (33) to display in the data stream?

  1. #1
    Electronic Ignition!
    Join Date
    Nov 2014
    Posts
    12

    How do I get the MAP Low (34) and MAP High (33) to display in the data stream?

    In the Tunerpro data stream, I see the following:

    Code 12, 13, 14, 15, 21, 22, and 23 being output to the display. (not saying they're being set, just that I can see them in the display).

    How do I get the rest of the codes to also show up on the display? Particularly code 33 and 34?

    Thanks

  2. #2
    Fuel Injected! JeepsAndGuns's Avatar
    Join Date
    Sep 2011
    Location
    alabama
    Age
    41
    Posts
    1,700
    What ADX file are you using? What vehicle/engine/code mask?
    If the items are not in the current ADX, and there are not other ADX's available that does have them, you can manually add them to the ADX file. Been a long time since I have done that, so I am a little rusty.
    79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy

    93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver

    99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.

  3. #3
    Electronic Ignition!
    Join Date
    Nov 2014
    Posts
    12
    Disregard.... I went to the Tunerpro website and found 8D_90-91_Corvette.adx. This has everything in it. Thanks the quick reply though.

Similar Threads

  1. 2 1/16 gauge ECM data display
    By 3400tZ in forum Other EFI systems and related topics
    Replies: 83
    Last Post: 09-03-2015, 05:38 AM
  2. Issues getting bin data to display correctly in TPRT
    By buddrow in forum TunerPro Tuning Talk
    Replies: 7
    Last Post: 09-09-2014, 05:17 PM
  3. OBD2 data stream ?'s
    By buddrow in forum OBDII Tuning
    Replies: 1
    Last Post: 01-30-2014, 05:50 AM
  4. OBD1 data stream
    By damanx in forum TunerPro Tuning Talk
    Replies: 4
    Last Post: 10-11-2013, 05:38 PM
  5. $42 adding spark advance to Data Stream?
    By EagleMark in forum GM EFI Systems
    Replies: 5
    Last Post: 02-05-2012, 02:33 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •