I'm new to this forum, but was hoping for some help from the experts here.
I'm building a 37 Buick Roadmaster using a 95 Roadmaster LT1 donor car.
Looks like I can fit the 95 Fuel tank, but I would like to upgrade the fuel pump.
From pictures on the internet, it appears the B-body fuel pump does not have a return line that feeds into pump can. (See 1st picture).
Have read that it is recommended to keep B-body gas tank 1/3 full to keep fuel pump cool.
The F-body fuel pump appears to have return line feed into the pump can which would cool the pump. (See 2nd picture)
1) Can anyone confirm that these pictures are typical of the fuel pumps found on these cars?
2) Does the F-body gas just spill out of the top after it is forced into the pump can?
3) Does anyone know if I could swap put the B-body pump assy for a F-body?
Thanks