Results 1 to 3 of 3

Thread: TunerPro RT will not connect using current .adx and .xdf, usb port is good

  1. #1
    Fuel Injected!
    Join Date
    Jan 2014
    Posts
    98

    TunerPro RT will not connect using current .adx and .xdf, usb port is good

    new laptop, had to install all new software from beginning
    Tuner Pro RT
    using these files from gearhead-efi page that excel lookup sent me to: But will not connect when to 1227747 ecm with usb tft232 board. Anybody know why. Did I forget something?
    Thanks Tyree

    1227747 Attached Files

  2. #2
    Fuel Injected!
    Join Date
    Jul 2012
    Location
    Fresno, CA
    Posts
    422
    In TunerPro, check under Tools-Preferences-DataAcq/Emulation and see if it's setup properly for your connection. I recently had the same problem on a new install and it turned out that the interface type wasn't selected. I don't remember having to do anything there on previous versions of TunerPro.
    1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
    1975 280Z, TBI 350, 700R4
    1953 M-38A1, TBI Buick 231
    1951 Ford Panel, 5.3 with 4L80E

  3. #3
    Fuel Injected!
    Join Date
    Jan 2014
    Posts
    98
    I got it figured out. I forgot some settings in tunerpro. Thanks all

Similar Threads

  1. will TunerPro RT v5 work with a printer port
    By RRice in forum TunerPro Tuning Talk
    Replies: 9
    Last Post: 08-13-2014, 08:28 AM
  2. New to tuning. Concered about my current bin file?
    By Woods in forum GM EFI Systems
    Replies: 6
    Last Post: 01-18-2014, 06:28 AM
  3. How do I save my current tune to my PC?
    By fuzzcar in forum GM EFI Systems
    Replies: 2
    Last Post: 05-24-2013, 08:32 PM
  4. Cant get Tunerpro RT to connect once engine starts
    By Fastmax32168 in forum TunerPro Tuning Talk
    Replies: 34
    Last Post: 10-25-2012, 10:19 PM
  5. USB Cable won't connect to TunerPro for data Aqcusition.
    By EagleMark in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 02-20-2012, 11:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •