Results 1 to 4 of 4

Thread: LT1 Proper Tune with TunerPro $EE that works!

  1. #1
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477

    LT1 Proper Tune with TunerPro $EE that works!

    Man I have a lot of hours into making a new $EE adx file that works, sent one off to Mark at TunerPro as he has some Corvette guys interested.

    But just to show I have it working... and my LT1 it Tuned nicely at WOT here's a picture... I changed settings for Power Enrichment from On and Off to Off and BIG POWER when activated!

    Notice BLM and INT Right and Left at 128? 100% TPS, See O2 sensor around .900? No Knock... 3425 RPM is in third gear, I have 2:92 gears... just not enough runway to go faster and have time to stop... Don't look at the speed of 102 MPH this was not done on public roads...

    Attached Images Attached Images

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,300
    Nice work!

    dave w

  3. #3
    Vintage Methane Ejector
    Join Date
    Apr 2011
    Posts
    194
    Nice Dash! I like those 1/2 circle gauges!

  4. #4
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    64
    Posts
    10,477
    I have several that I have collected, I copy and paste them into adx then open it in TP and right click and set values, one from your trans $OD in here too! They are all in this new $EE.

    I did not make the others, I wish I knew who did so I could note in the adx the author of each dash. I like to give credit to those who did the work and hate taking credit for someone elses work! Even if I have to rebuild it in each adx...

    If you ever need $42 stuff I have the xdf and adx dialed in!

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •