Hello,
I am making headway with my education, but it is slow. I am using the gm 1227747, and a hacked bin and xdf file from a chevy 5.0 tbi with non-electric controlled automatic transmission. I don't have an engine built yet, so I am just playing with Tuner-Pro to get used to it. Here is what I have changed so far, let me know if I my intended purpose will be achieved.
I changed the cylinder numbers to six
Disabled the egr by maxing out the temp, and putting a zero in the max tps to allow egr on.
Disabled closed loop (I think) by maxing the closed loop closed tps threshold. (I want an open loop only system, due to o2 sensor foulage problems with leaded fuel)
Disabled highway cruise by maxing out min coolant temp
I am guessing that BLM works only in closed loop, so it should be disabled.
Changed engine start up rpm to 800
Disabled knock by maxing out min rpm enable

Trying to figure out Idle RPM in open loop adjustment, all I can find is tps position in park/neutral, and out of park/neutral...

I also will be getting an affordable fuel injection kit for this engine, so I may be able to read one of their proms and modify it. Not sure if theirs is hacked or not though. Oh what a learning curve, my head hurts...