Hi guys,
I changed my '95 Corvette from auto to manual and changed the instrumental calibration for the new sensor via the excel file from this thread. (http://www.gearhead-efi.com/Fuel-Inj...rmation-EE-EEB)
I could't use the original manual config, because I kept my 3.07 axle instead of using the 3.45 axle of the manual. The speedo works now, but the cruise control doesn't. Any ideas? I can't find any wiring problems, except the new PCM configuration with 5500 PPM now, instead of the 100 000 at the automatic tranny or 4000 with the manual.

Max