ABS cycle

[grasshopperglock]

On a 94 camaro, I need to cycle the ABS to bleed. It's 3 channel

Now before y'all start answering, Bleed this and that, cycle key, stomp the brakes, get a tech 2, take it to the dealership, it's a stand alone system not meant to be messed with....


There has to be a way to activate the ABS motors just enough to spit the air down the line. I'm not looking to function test. Simply the best purge I can get it to do.

Any ideas?

[grasshopperglock]

ABS delete kit is also out of the question. I'm not cutting the factory lines.

[1project2many]

Stand alone or not, if it's GM installed then it's intended to be serviced by GM techs with an appropriate scan tool. I believe that's a Delco IV system and there is service information out there. Most of these systems can be tricked into purging by causing an ABS stop but I wouldn't do that without a good area and no one around to bother you.