Results 1 to 8 of 8

Thread: Anyone used the TOAD software?

  1. #1
    Carb and Points!
    Join Date
    Mar 2015
    Location
    Mclennan County, Texas
    Age
    68
    Posts
    4

    Anyone used the TOAD software?

    Ran across TOAD http://www.totalcardiagnostics.com/toad/, looking around a bit. Anyone have any experience with it?
    Thanks

  2. #2
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    blatant theft IMO.

    http://www.totalcardiagnostics.com/s...r-support-list

    whoever put this all together pulled exact copies of the support lists for a few different software packages, I recognize tunerpro and freescan at a minimum.

    so, this person appears to be profiting of off the work myself and many others have put into the DIY community.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  3. #3
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  4. #4
    Fuel Injected! PJG1173's Avatar
    Join Date
    Nov 2011
    Location
    Jacksonville NC
    Age
    50
    Posts
    641
    Quote Originally Posted by RobertISaar View Post
    blatant theft IMO.

    http://www.totalcardiagnostics.com/s...r-support-list

    whoever put this all together pulled exact copies of the support lists for a few different software packages, I recognize tunerpro and freescan at a minimum.

    so, this person appears to be profiting of off the work myself and many others have put into the DIY community.
    LOL beat me by a min... look at the hardware they picture. Its the same junk you can get on ebay for $6
    87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
    93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
    05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,

  5. #5
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    yeah, there is all kinds of goofy things going on with that website. any page that fires off a pop-up when I attempt to close it is already on my do-not-revisit list.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  6. #6
    Carb and Points!
    Join Date
    Mar 2015
    Location
    Mclennan County, Texas
    Age
    68
    Posts
    4
    Looked like a "Too good to be true" ad. Thanks guys!
    Trying to get a handle on TunerPro RT on my son's 88 iroc, and looking for some software for 2001 3.8 Buick. Bought an OBDlink SX to see if it has flashing ability for the Buick. Have read that others are successfully doing so with it.

  7. #7
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    Quote Originally Posted by phlockhart View Post
    Have read that others are successfully doing so with it.
    if you have luck with that, do report back.
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  8. #8
    Carb and Points!
    Join Date
    Mar 2015
    Location
    Mclennan County, Texas
    Age
    68
    Posts
    4
    Will do!

Similar Threads

  1. Looking for OBD2 software recomendations.
    By damanx in forum Gear Heads
    Replies: 4
    Last Post: 11-12-2014, 12:08 PM
  2. C3/P4 open hardware/software project?
    By jdarg in forum GM EFI Systems
    Replies: 45
    Last Post: 11-12-2014, 07:20 AM
  3. OBDII Software
    By k2500 in forum OBDII Tuning
    Replies: 4
    Last Post: 07-01-2014, 07:16 PM
  4. Which programming software LT1 16188051 PCM ?
    By EDZIP in forum GM EFI Systems
    Replies: 6
    Last Post: 01-30-2014, 03:12 AM
  5. Tuner Pro software
    By Six_Shooter in forum EFI Parts, Supplies, Software and Reviews!
    Replies: 3
    Last Post: 04-05-2011, 07:47 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •