Results 1 to 2 of 2

Thread: 6395 egr question

  1. #1
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386

    6395 egr question

    I have 6395 pcm, BHDF bin. Modded 454 that is going back in won't have egr. The stock version has an egr that has pintle position feedback. So even though I turn off enough perameters that will keep it from working will the pcm still be looking for pintle position? If I Unset code 32 egr failure will that just make the normal operation including CEL ignore the egr?

  2. #2
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    50
    Posts
    504
    You can max out the temperature for EGR ON to 151.3 and possibly set minimum speed for egr to 255 and this should disable it. Usually all qualifiers have to be met before it is enabled.You can then turn off the error code for egr.

Similar Threads

  1. 6395 7427 8625 Manual Trans Calibration Listing
    By 1project2many in forum GM EFI Systems
    Replies: 22
    Last Post: 03-28-2019, 02:54 PM
  2. Mat with 6395
    By myburb in forum GM EFI Systems
    Replies: 5
    Last Post: 01-28-2015, 09:11 PM
  3. 454 with 6395 pcm
    By myburb in forum GM EFI Systems
    Replies: 3
    Last Post: 11-22-2014, 10:22 PM
  4. Wanted , BBC '7427 / '6395 Memcals
    By Nasty-Z in forum Buy - Sell - Trade - Wanted
    Replies: 0
    Last Post: 11-04-2013, 05:13 AM
  5. 6395 pcm with 7.4L memcal, and 7427 with 5.7 memcal
    By JeepsAndGuns in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 05-24-2013, 02:41 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •