One of the first things I want to do with my custom programming is disable the EGR. I'm trying to find a procedure for which parameters/settings to change but I haven't found anything. I sandwiched a piece of sheet aluminum between the EGR valve and intake to block it off. So far I have increased the EGR On/Off RPM to the maximum values and zeroed out the SA - Spark Retard vs EGR % table. Do I need to modify any other parameters to keep the EGR from changing anything else?
1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10
Max out "EGR - Enable Temp" and that should take care of it.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
Awesome! Thank you!
1990 Chevrolet K2500, RCLB, Blueprint 383 TBI (16197427 ECM / 61 lb/hr / 16 psi FP), NV4500, NP241C, 4.10
Posting Permissions
Reply With Quote
Bookmarks