Results 1 to 11 of 11

Thread: Reading gm memcal

  1. #1
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386

    Reading gm memcal

    I would like to read the bin from a 94 gm 6395 pcm without any desoldering. I know the moates HDR1 will do it but for me it is the $10 and then $50 shipping to me so just trying to see if any other alternatives. I have a apu1 and g1.
    Last edited by myburb; 03-14-2015 at 01:47 AM.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    You could cut and bend small diameter paper clips into short pieces and insert them into the Memcal, and then bent the paper clips to fit into the APU1.

    There are several stock .bin files here: http://www.gearhead-efi.com/Fuel-Inj...ams-Tuner-Info!

    dave w

  3. #3
    Fuel Injected!
    Join Date
    Jul 2012
    Location
    Fresno, CA
    Posts
    422
    If the bin file you need isn't in the link dave w provided, let us know and maybe one of us has the same memcal and can do a read for you.
    1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
    1975 280Z, TBI 350, 700R4
    1953 M-38A1, TBI Buick 231
    1951 Ford Panel, 5.3 with 4L80E

  4. #4
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    The burb has the motor out and is stored so took awhile to get to the pcm. It is BHDF and by the looks of the dust it is original. It is a canadian build so don't know if that changes the bin. Anyhow I found one on Dave's site which I think are stock bins. For xdf I have Advanced $OE TPS v250 and for adx I have A220 trans2 $OE TPS v250. Are those files the best ones to be using? The modified motor should be going in shortly so will start changing bin.

  5. #5
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    The copy of BHDF I have is $OE.

    dave w
    Attached Files Attached Files

  6. #6
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    Dave is the above BHDF.bin the same as the 6395 link BHDF 94 C-G-K Truck 7.4TBI 4l80.bin Both are 64kb

  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Quote Originally Posted by myburb View Post
    Dave is the above BHDF.bin the same as the 6395 link BHDF 94 C-G-K Truck 7.4TBI 4l80.bin Both are 64kb
    My library of OBD1 .bin files is organized by Broadcast Codes (BCC) only, I don't know the vehicle applications. To the best of my knowledge, the .bin files in the link are accurate. TunerPro has a compare function, which would let you know if there are any differences between the BHDF .bin I posted vs. the link BHDF.

    dave w

  8. #8
    Fuel Injected!
    Join Date
    Aug 2012
    Posts
    386
    My limited knowledge of compare says those two bins are the same. Thanks

  9. #9
    Electronic Ignition!
    Join Date
    Mar 2013
    Age
    48
    Posts
    13
    I am trying to find the stock factory settings for 1227747 AMUR. I looked at the bin on tuner pro but could not figure out the operating range of each sensor. I'm troubleshooting and via my scanner can see what is out of range but need the factory settings to go off of. Any help is appreciated. Chris_Bama @ netzero d0t c0m

  10. #10
    Fuel Injected!
    Join Date
    Jan 2017
    Posts
    411
    I've purchased one of these connectors about 20 years ago, although a 34 pin is what I purchased, ironically a 40 pin one cost cheaper than the 34 pin one. Need to cut one side to accept the memcal and the longer pin side need to lose a few pins leaving 28. I know shipping won't help you here either. https://media.digikey.com/photos/CW%...70-40-0000.jpg

    @ChrisBama you can download what you're looking for here... http://www.gearhead-efi.com/Fuel-Inj...Information-42

  11. #11
    Fuel Injected! S.O.B.B.'s Avatar
    Join Date
    Nov 2017
    Location
    Ontario Canada
    Posts
    167
    Got these off eBay. Came in under 30 days.Screenshot_2018-01-25-12-07-47.jpg
    Jeeper
    87 sjimmy powered by a 92 cadillac 4.9L pfi on 7427pcm /700r4/ 8.8 3.55 rear/disc brakes.

Similar Threads

  1. Replies: 5
    Last Post: 06-08-2014, 05:23 PM
  2. 6395 pcm with 7.4L memcal, and 7427 with 5.7 memcal
    By JeepsAndGuns in forum Buy - Sell - Trade - Wanted
    Replies: 2
    Last Post: 05-24-2013, 02:41 AM
  3. 16197427 Memcal vs 16196395 Memcal
    By corvairnut in forum GM EFI Systems
    Replies: 25
    Last Post: 12-11-2012, 07:41 AM
  4. Tunerpro TPS reading
    By Fastmax32168 in forum TunerPro Tuning Talk
    Replies: 2
    Last Post: 09-22-2012, 02:54 AM
  5. Painless VSS + 16197427 = no VSS reading.
    By Six_Shooter in forum GM EFI Systems
    Replies: 4
    Last Post: 03-21-2011, 03:09 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •