Making Monitors in TunerPro V5 RT

[EagleMark]

Here's a quick how to make a monitor in TunerPro V5 RT

First open your adx file or import your ads file, if you import a ads file TP will immediately ask you to save it as an adx file and it will stay open in TP. Every ads file I have found already has an imported monitor in it but it is blank.

First click on the monitor button.


Then the monitor will open.



If it does not have one then click on Acquisition, Edit Definition, Monitor then down below Add New Item. Give it a name and a unique ID. Every item in an ADX file has to have a different (Unique) name. Most are numbers, but they can be letters or names, numbers do not have to be in order and you can be missing numbers. Key here is Unique to that item, no 2 anything can have the same name and if you choose say 11 and there is already 11 TP will tell you. So it's no big deal...
You can set up the Monitor here too but easier to start setting up monitor in next step.


Then right click on the monitor and a list of items from the values will appear. Click on each one you want to watch while connected to vehicle or while playing back recorded data. Simple as that!


Here's what the monitors look like playing back data. This is from the $42-1227747-V3adx I built and is in the 1227747 information thread.



Happy tuning!