I have been tuning for many years but am new to this software and can't find where to adjust for a gear change on a 16197427 & $0D mask. Any help would be greatly appreciated.
I have been tuning for many years but am new to this software and can't find where to adjust for a gear change on a 16197427 & $0D mask. Any help would be greatly appreciated.
Normally you'd make the change by changing the VSSB jumpers. The popular mod is to replace the jumpers with a couple of DIP switches. In other words, you don't normally change anything in the .bin on the 7427. On a '95, the VSSB is underneath the ECM.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
Thank you for the reply, I've never performed that mod but my question is will this just correct the speedo or will it adjust the transmission scalers also?
No, it corrects the signal going to both the speedo and ECM.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
Thank you for your help
Posting Permissions
Reply With Quote
Bookmarks