Anyone tell the PIN number I would use if I set mat sensor on a 6395 on a 94 454 which stock is unset? More questions to follow.
Anyone tell the PIN number I would use if I set mat sensor on a 6395 on a 94 454 which stock is unset? More questions to follow.
STANDARD MOTOR PRODUCTS Part # AX1 Found that one on rockauto.
Or if you want to look it up at a local parts store. Get one from a 91 chevy camaro 5.7 V8. Thats what I used on my 7427 mpfi system.
79 Jeep Cherokee, AMC 401, T-18 manual trans, hydroboost, 16197427 MPFI system---the toy
93 Jeep YJ Wrangler, 4.0L, 5 speed, 8.8 rear, homebrew hub conversion and big brakes, hydroboost, 2.5in OME lift, 31x10.50's---the daily driver
99 Jeep WJ Grand Cherokee limited, 4.0L, auto, 2wd, leather and power everything, 99% stock---the long distance highway ride.
B9 is the correct pin at PCM.
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
Sub'd for info.
94 Blazer, Turbo'd 350 TBI - DD
1991 2500 Suburban Adventure truck - 4wd conversion, 4-link F/R, 582ci CNP Big Block with Terminator X EFI backed by a 6L90 and twin stick'd NP205 t-case
2012 Porsche Panamera Turbo - Date night car :)
1979 16' Action Marine/"Johnny Cash" Merc Bridgeport Champ Motor - Metalflake Maniac
I am guessing the ground would be the sensor gnd at b3
Ground to engine at thermostat housing with the other engine grounds.
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
Bookmarks