Rolly,
The bin Dave posted is a $31 Mask. You need to load the $31 XDF. Different mask will show different values because the parameters are in different locations within the bin file.
Yes! Maybe this helps explain some things.

Rolly, the different chip ID's you see, $31, $0E, and $0D, are identifiers for where the specific variables are arranged within the calibration. When you load an XDF, Tunerpro is instructed to treat each variable in each defined location a certain way. There will be a variable (or table) name and a conversion factor so the binary value represents a number we understand. If a .bin with the wrong mask ID is loaded then Tunerpro does not do any sanity checking. It will treat the variables as it has been instructed, giving each the predefined name and displaying the value according to the conversion formula. It could treat temperature as timing, throttle values as O2 parameters, or fuel injector size as rpm. For many this issue never comes up but unfortunately the 7427 and sister pcm's share three commonly used mask files.