Quote Originally Posted by delcowizzid View Post
we dont veiw voltages but the resistance withen the netres chip that changes the voltage on the pins.TBI to pfi v8 actually looks like it needs a couple of mods with resisters to be factory correct. anyone care to measure the resistance of the pins above on a TBI memcal to see if it has the 7.5K between the 2 pins of the v8 memcal setup
Don't understand HOW netres chip voltage dividers are converted to discriminate 2nd or 4th Distributor Reference Pulses. Which two pins does the netres resistance need to be measured. Need a memcal pin layout reference to start with to be certain where to measure.