Tuning '94 chev Suburban Big Block

[rsicard]

we dont veiw voltages but the resistance withen the netres chip that changes the voltage on the pins.TBI to pfi v8 actually looks like it needs a couple of mods with resisters to be factory correct. anyone care to measure the resistance of the pins above on a TBI memcal to see if it has the 7.5K between the 2 pins of the v8 memcal setup

Don't understand HOW netres chip voltage dividers are converted to discriminate 2nd or 4th Distributor Reference Pulses. Which two pins does the netres resistance need to be measured. Need a memcal pin layout reference to start with to be certain where to measure.

[dave w]

The only Memcal information I have is for the '7727, '7730, & '7749 ECM I downloaded from Thridgen.org years ago. See attached pic. I DO NOT KNOW if the '7427 Memcal is exactly same? I'm not sure it's a good idea to post the pic of a different Memcal? I strongly suspect that GM would not re-invent the wheel when it came time to design the '7427 Memcal. It's likely GM would leverage / re-purpose a Memcal it already has / had in production for the '7427 Memcal with maybe a different component (limp home mode) on the Memcal for TBI?

dave w