Results 1 to 6 of 6

Thread: Switch off 10k resistor on bluetooth?

  1. #1
    Electronic Ignition! gearhead1's Avatar
    Join Date
    Feb 2014
    Location
    Ontario
    Posts
    18

    Switch off 10k resistor on bluetooth?

    Anybody know how to switch off the 10k resister on reddevilriver aldl bluetooth?
    When I use it , it goes in aldl mode and raises my idle.
    Tried calling,leaving messages but with no reply from Timm Bacher.
    Thanks
    Last edited by gearhead1; 01-20-2015 at 12:13 AM.

  2. #2
    Fuel Injected! sturgillbd's Avatar
    Join Date
    Jun 2012
    Location
    Big Stone Gap, VA
    Age
    50
    Posts
    504
    I have looked for docs on this and nothing found. One way you can disable it is to pull pin B out of the aldl connector and insulate it to keep it from being grounded. Could also put a switch inline with it and leave it in the connector. This will get around the problem of being in ALDL mode. Not a definite fix but a workaround.

    Brian

  3. #3
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,007
    that's not a bad fix really. since you own proper diagnostic tools that are portable, you'd probably never use pin B for anything ever again

  4. #4
    Electronic Ignition! gearhead1's Avatar
    Join Date
    Feb 2014
    Location
    Ontario
    Posts
    18
    Yeah I am going to push the pin out of my female connector just thought there was a simple switch inside the bluetooth.
    So much for service after the sale! I hope no one else has any other problems with theirs...oh well ;next one will be from 1320 electronics;
    Live and Learn
    Last edited by gearhead1; 01-19-2015 at 04:13 PM.

  5. #5
    Fuel Injected! 1BadAction's Avatar
    Join Date
    Apr 2012
    Location
    Dallas, TX
    Age
    41
    Posts
    391
    Quote Originally Posted by gearhead1 View Post
    Yeah I am going to push the pin out of my female connector just thought there was a simple switch inside the bluetooth.
    So much for service after the sale! I hope no one else has any other problems with theirs...oh well ;next one will be from 1320 electronics;
    Live and Learn
    Yup, you're on your own with the RDR adapter. mine connects at a lower baud rate unless I power it through the USB cable and connect my tablet FIRST. Couldn't get any help with it at all.
    94 Blazer, Turbo'd 350 TBI - DD
    1991 2500 Suburban Adventure truck - 4wd conversion, 4-link F/R, 582ci CNP Big Block with Terminator X EFI backed by a 6L90 and twin stick'd NP205 t-case
    2012 Porsche Panamera Turbo - Date night car :)
    1979 16' Action Marine/"Johnny Cash" Merc Bridgeport Champ Motor - Metalflake Maniac

  6. #6
    Fuel Injected! brian617's Avatar
    Join Date
    Apr 2013
    Location
    Arkansas
    Age
    45
    Posts
    711
    http://www.gearhead-efi.com/Fuel-Inj...159-phonedawgz I believe this is the guy that builds them.
    89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
    95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
    05 Outback XT 2.5L turbo gas auto

Similar Threads

  1. 1320 Electronics ALDL Bluetooth dongle
    By pma4x4 in forum GM EFI Systems
    Replies: 9
    Last Post: 06-21-2014, 08:34 PM
  2. bluetooth ?
    By doctortuned in forum TunerCat OBDII
    Replies: 3
    Last Post: 06-06-2014, 11:51 PM
  3. netural safety switch
    By gopher in forum Introductions
    Replies: 4
    Last Post: 12-14-2013, 06:09 AM
  4. p/n switch on EE manual?
    By steveo in forum GM EFI Systems
    Replies: 4
    Last Post: 12-02-2013, 04:35 AM
  5. Bluetooth OBD1 Module availability
    By phonedawgz in forum GM EFI Systems
    Replies: 3
    Last Post: 12-19-2012, 04:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •