Anybody know how to switch off the 10k resister on reddevilriver aldl bluetooth?
When I use it , it goes in aldl mode and raises my idle.
Tried calling,leaving messages but with no reply from Timm Bacher.
Thanks
Anybody know how to switch off the 10k resister on reddevilriver aldl bluetooth?
When I use it , it goes in aldl mode and raises my idle.
Tried calling,leaving messages but with no reply from Timm Bacher.
Thanks
Last edited by gearhead1; 01-20-2015 at 12:13 AM.
I have looked for docs on this and nothing found. One way you can disable it is to pull pin B out of the aldl connector and insulate it to keep it from being grounded. Could also put a switch inline with it and leave it in the connector. This will get around the problem of being in ALDL mode. Not a definite fix but a workaround.
Brian
that's not a bad fix really. since you own proper diagnostic tools that are portable, you'd probably never use pin B for anything ever again
Yeah I am going to push the pin out of my female connector just thought there was a simple switch inside the bluetooth.
So much for service after the sale! I hope no one else has any other problems with theirs...oh well ;next one will be from 1320 electronics;
Live and Learn
Last edited by gearhead1; 01-19-2015 at 04:13 PM.
94 Blazer, Turbo'd 350 TBI - DD
1991 2500 Suburban Adventure truck - 4wd conversion, 4-link F/R, 582ci CNP Big Block with Terminator X EFI backed by a 6L90 and twin stick'd NP205 t-case
2012 Porsche Panamera Turbo - Date night car :)
1979 16' Action Marine/"Johnny Cash" Merc Bridgeport Champ Motor - Metalflake Maniac
http://www.gearhead-efi.com/Fuel-Inj...159-phonedawgz I believe this is the guy that builds them.
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
Bookmarks