Replacing 28f512 plcc32 with sockets and using a genius g540 programmer. im looking for these fileshttp://www.akmcables.com/Obd1-t.bin
http://www.akmcables.com/Obd1-e.bin or any others the work. Any help? Thanks Jonathon
Replacing 28f512 plcc32 with sockets and using a genius g540 programmer. im looking for these fileshttp://www.akmcables.com/Obd1-t.bin
http://www.akmcables.com/Obd1-e.bin or any others the work. Any help? Thanks Jonathon
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
ive tried those files and i get a ProgramOperation: Error ****
Attachment 8369Attachment 8370Attachment 8371Attachment 8372
The one screen I didn't see is the chip selection. Do you have the right one selected?
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
ok i come to the conclusion that im not doing something right. for example if i load the bin at 5000 it wil burn to 5000 then stop and error
Attachment 8377Attachment 8378Attachment 8376Attachment 8379
Is this Windows 8? Maybe the G540 doesn't have good drivers for 8? I'm using win7 without any issues, but those aren't the chips I'm burning.
1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
1975 280Z, TBI 350, 700R4
1953 M-38A1, TBI Buick 231
1951 Ford Panel, 5.3 with 4L80E
yep windows 8 and installed drivers correctly
So are you actually flashing the chip(s) that have been removed from the PCM? If so I would love to see a photo of the inside of the PCM showing where the chips are located.
Posting Permissions
Reply With Quote
Bookmarks