Results 1 to 4 of 4

Thread: newbee

  1. #1
    Carb and Points!
    Join Date
    Dec 2014
    Age
    75
    Posts
    2

    newbee

    I have a 2004 Sierra 6L automatic 4X4 3500 dully flat bed I use farming and was looking for wiring diagrams to fix the blower motor and found a post on this forum I thought might be useful. Thanks for letting me in.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268


    dave w

  3. #3
    Fuel Injected! BLG355's Avatar
    Join Date
    Feb 2014
    Location
    Elizabethtown, PA
    Age
    41
    Posts
    220
    In case you need some wiring diagrams...

    BLG
    My Build: 95 K1500, 355ci w/ OEM roller setup - zero decked, Eagle steel crank, Scat bushed H-beam rods, Speed Pro 2V flat top pistons - Rotating assembly balanced. Dart 165cc Iron Eagle S/S heads - 72cc chambers - 1.94 / 1.50 valves. Isky roller cam - 204/209 dur @ .050 - .480/.496 lift with Comp Magnum 1.6 rockers, Edelbrock 3704 intake - Bored to 52mm - 454 throttle body, Delco EP381 fuel pump @ 18 psi running through 80# 454 injectors. Hedman Headers into 3" Dynomax exhaust.

  4. #4
    Carb and Points!
    Join Date
    Dec 2014
    Age
    75
    Posts
    2
    Yes sir. Thanks that's what I needed. maybe you know the answer to this. I doing my home work I figure out that with all the slow speeds working on the blower motor and the 40 amp fuse is ok my problem was the relay for the blower motor. I went to the parts store (AutoZone) and asked them to look up blower motor relay and they have one. It a five prong relay but no one knows where it goes. When I look at the wiring diagrams it looks like the resistors have the relay in there already and no way to repair that part. I guess my question is why would they sell a part that doesn't go anywhere? It must go somewhere. Maybe you know where it goes? I sure can't figure it out. Thanks again.

    I'm thinking I may have figured it out. I haven't taken it apart yet but it maybe that they have changed the part so that when you buy the resistors the the relay is now molded in so it's not a pug in any more. If thats not the answer I'll post it here after I take mine out and have a look see. Now when you buy the resistors which is what evey one thinks is the problem you get the relay too. Thanks.
    Last edited by wjkrostek; 12-28-2014 at 10:54 PM. Reason: did some thinking.

Similar Threads

  1. Newbee
    By JimmyC in forum Introductions
    Replies: 1
    Last Post: 11-18-2014, 07:52 PM
  2. newbee
    By l h jenkins in forum Introductions
    Replies: 1
    Last Post: 08-25-2014, 05:54 AM
  3. HI newbee here from nebraska.....
    By bluegt65 in forum Introductions
    Replies: 0
    Last Post: 04-20-2014, 07:28 PM
  4. Newbee from AZ.
    By jaber in forum Introductions
    Replies: 4
    Last Post: 12-25-2012, 05:50 PM
  5. Newbee
    By coronado27r in forum Introductions
    Replies: 2
    Last Post: 07-20-2012, 05:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •