I am tuning my 91 Chevy G30 454 4l80e motor home with a 16147060 ECU with AWYP memcal. I have read through most of the postings about the $85 and have a couple of questions.

Is this list complete for the parameters and values to get a good data log?
Bypass WOT Delay, (Eng Speed) + *data log off 1* set to 0.00
Wide Open Throttle Delay + *data log off 2* set to 0.00
Min. Coolant Temp. To Enable EGR + *data log off 3* max to 151.25
EGR RPM/MAP Select, X=RPM + "data log off 4" unset
Err 32, EGR Err, X=Enabled + *data log off 5* unset
Power Enrichment Spark Vs. RPM + *data log off 6* set table to 0.00

Are these the correct parameters and values to enable CL idle?
RPM to Enter Open Loop + set to 25 to enable CL idle
RPM to Exit Open Loop + set to 50 to enable CL idle