Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 2 of 2

Thread: New Member!

  1. #1
    Carb and Points!
    Join Date
    Dec 2014
    Location
    Minnesota
    Age
    28
    Posts
    6

    New Member!

    Hello,

    My name is Julian and I live in Minnesota. I own a couple of TBI equipped vehicles and am interested in learning how to tune/burn chips for them. One is a 1989 Pontiac Firebird Formula with the stock 305 TBI and 700R4. The other is a 1990 Chevy K1500 with a rebuilt 350 and 700R4 as well. The rebuilt motor is bored .060 with cast pistons and an approximate compression ratio of 9.2:1
    Comp Cams 4x4 254 hydraulic flat tappet
    Edelbrock E-Street 64cc heads
    Comp cams 1.6 ratio roller rockers
    Edelbrock Performer intake w/TBI adapter plate and 1" spacer
    Stock ignition and stock TBI so far

    I have always enjoyed wrenching on cars so the idea of using TunerPro RT and learning to tune/burn a chip myself definitely appeals! Although I have experience in other automotive areas I must admit in the area of EFI tuning I am very much a novice. After reading in the forum and discovering the wealth of data available here I had to join! If anyone has some suggested reading I would very much appreciate it.
    Thank You!

  2. #2
    Fuel Injected!
    Join Date
    Jul 2012
    Location
    Fresno, CA
    Posts
    422
    Welcome!
    1973 K-5 Blazer, TBI 350, TH400, 1 ton axles & 38" SSRs'
    1975 280Z, TBI 350, 700R4
    1953 M-38A1, TBI Buick 231
    1951 Ford Panel, 5.3 with 4L80E

Similar Threads

  1. New member
    By 36chevy in forum Introductions
    Replies: 3
    Last Post: 12-29-2014, 05:40 PM
  2. New member
    By ItalianCorvette in forum Introductions
    Replies: 7
    Last Post: 12-26-2014, 03:26 PM
  3. New member
    By TPI 86 Caprice Landau in forum Introductions
    Replies: 2
    Last Post: 10-10-2014, 07:37 PM
  4. another new member
    By rgarrett in forum Introductions
    Replies: 1
    Last Post: 08-02-2014, 02:50 PM
  5. New Member from MI
    By jester8798 in forum Introductions
    Replies: 1
    Last Post: 04-01-2014, 11:54 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •