Results 1 to 2 of 2

Thread: 1227747 Chevy 350 Datalog running rich

  1. #1
    Electronic Ignition!
    Join Date
    Feb 2012
    Location
    Chino, CA
    Posts
    13

    1227747 Chevy 350 Datalog running rich

    The attached datalog is for a 1968 Landcruiser with an older non TBI Chevy 350 (no EGR) and it is running rich. Is the reason the IAC position climbs to 140 because the ECU is trying to lean the mixture? What setting needs to be changed to keep it from going into open loop at idle? Is this enough data to begin making the VE changes?.

    Attached is the ASDX modified bin I used and $42-1227747-V5.9.7.xdf and $42-1227747-V5.2.adx. The timing is set at 6*BTC and the "datalog off" 1-7 are all disabled. Am I missing anything?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I would lower the BPW down to 132 or 133 because overall closed loop data is rich. I'm thinking there are to many 108 BLM averages. My spreadsheet, see attached screen shot, filters for closed loop only.

    dave w

Similar Threads

  1. LS computer ('0411) running a Small Block Chevy
    By dave w in forum GM EFI Systems
    Replies: 39
    Last Post: 10-19-2016, 11:06 PM
  2. Help with 1227747 tuning datalog
    By jeepaddicted in forum GM EFI Systems
    Replies: 6
    Last Post: 12-03-2014, 03:58 PM
  3. Replies: 2
    Last Post: 07-15-2014, 10:46 AM
  4. Replies: 19
    Last Post: 11-23-2013, 03:05 AM
  5. Running rich in open loop
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 18
    Last Post: 09-16-2012, 06:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •