it is damn near impossible getting ahold of eaglemark with his medical issues; so, i NEED my car to be running good before december 6th to make a drift event.

i have the cable
i have the drivers
i have a computer with both winaldl [which doesn't recognize my pcm.... com port is correct and i tried both baud rates.... it says it's ok but won't show anything on tables] and tunerpro; which i have no clue where to begin with it...... i found a tutorial BUT the screenshots are broken.

so im at a loss. if ANYBODY can please help me; that would be FANTSTIC.

car - 1991 mazda miata
computer - 16196395
ditched the auto trans
no a/c
no smog equipment
rebuilt vortec 350 330hp crate
removed regulator from throttle body and am running external one at 17psi per my injectors

the engine smells SUPER rich. already had a base tune by him and i need to datalog so i can send it to him and get a revised tune.
the engine falls on its face if i blip the throttle, but if i ease into it, it does ok.
at the top end, it stutters like timing/starved of fuel.

i really need help. can anybody please guide me?

i can't do any WOT pulls unless its on the dyno because it just blows off the tires in 4th gear [225/45/15 hankook rs3's with locked 4.10 diff]

thanks in advance.
--Shawn Prince