4A-GZE conversion

[ericjon262]

plenty of 4age's running on 1227165 ecus on our forum the dizzy is pretty easy to interface with using a GM 7 pin hei module http://pcmhacking.net/forums/viewtop...lit=4age#p8830 team it up with the 2 or 3 bar aussie modified OSE $12P software and tune away fuel and spark tables to 9600 rpm and 30psi of boost

Thanks for the link. at this point, I was thinking about convincing my buddy to have a trigger wheel made so he can go DIS. wouldn't be too hard, and would be a big performance upgrade, but if the stock dizzy is interfaced easily enough, than all that would need to be adapted would be a TB with the proper IAC and TPS.

[Six_Shooter]

You can always start with the dizzy and then move to DIS later, like I did on my L28 in my Datsun years ago.

[ericjon262]

You can always start with the dizzy and then move to DIS later, like I did on my L28 in my Datsun years ago.

yeah, I could, but it's not my car, and me and my buddy are both military, and almost guaranteed to be in geographically different locations in 6-8 months. helping with software related stuff can be done over email. hardware would be a little more tricky.