The "Tan Brick" aka my 1997 Express Cobra conversion

[Nasty-Z]

I did a little more research and decided what the heck and ordered the cam. Might be a shade big for many heavy haulers, but my Express is fairly light compared to a Dually or a Workhorse. Seems the cam is Mid 220s @ .050 on the intake, mid 230s @ .050 on the exhaust, .510/.510" lift and cut on a 114* LSA opposed to the stock 118* LSA big block cam. For $360.00 shipped for the whole take-out cam kit, it is hard to turn down. 425 HP 496 mag reaches 425 HP before it reaches 5,000 rpm.

You will like that cam setup , I have used a few , been playing with the 8.1 for a while now and it is a very good swap and power increase for an upgrade. Ray and Larry offer great parts and reasonable (for what they are) prices , problem is its hard to justify all that $$ for a tow pig I suppose , but I did it for the '01 . The 8.1 is IMHO the most underrated gas engine recently , surprised more aftermarket support is not out there , but then again maybe I'm not surprised.....

I just don't want the added power loss!! My 4L80E already has the dual stator 4.3 converter that stalls 2,300 rpm behind the 350. The 10.5" FF I have has 3.73s in it. I want 4.10s in the back but a good comprimise might also be a 2.96 first gear planetary set in the 80E.

Understood.


Good luck Chris , I'm sure it'll be a cool ride.

TOM