Results 1 to 9 of 9

Thread: View compare tables side by side

  1. #1
    Fuel Injected!
    Join Date
    Aug 2014
    Age
    74
    Posts
    62

    View compare tables side by side

    Hey Guys,
    Can somebody tell me how I can view tables from different bin's side by side so I can see the difference in the tables? I've been trying to do it by loading the different bins with "compare bins". I can switch from 1>2 with the "ctrl1" etc. But I want to look at the respective tables side by side.

  2. #2
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008
    if you load the bin as a 'compare bin' then there are two buttons in the toolbar when viewing the table data that help.

    if you hover the mouse over them, you'll see one called 'show comapre bin data'. pressing that button shows the data from the other table (replacing the data from your table)

    leave that button clicked, and also click the next one called 'compare difference'. this will show the difference between your table and the other table (if it shows -2, that means your value is 2 lower than the table you're comparing with. if it shows 12, your table is 12 higher.)

    i've attached a picture so you see what i mean.

  3. #3
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008
    another way is to view the tables overlayed as a graph. click wireframe view and show compare graphs in the toolbar like pictured.

    don't leave the 'compare' stuff on the table itself set (like in previous post) when you do this, or things will get messed up.

  4. #4
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008
    the last way is with tools, custom tools, new tunerpro instance. that opens a whole other tunerpro, which you can display another bin side by side. this should be unnecessary when using the compare feature properly except when moving tables from a different mask or something.

  5. #5
    Fuel Injected!
    Join Date
    Aug 2014
    Age
    74
    Posts
    62
    Thanks Steve, I was able to do the first and last example. So, if the compare table comes up with all zero's then there is no difference in the 2 tables, right?
    .

  6. #6

  7. #7
    Fuel Injected!
    Join Date
    Dec 2013
    Location
    Middle of Nowhere, MT
    Posts
    107
    Quote Originally Posted by steveo View Post
    the last way is with tools, custom tools, new tunerpro instance. that opens a whole other tunerpro, which you can display another bin side by side. this should be unnecessary when using the compare feature properly except when moving tables from a different mask or something.
    Awesome, did not know about that feature. Had been wanting to do something like that.

  8. #8

  9. #9
    Fuel Injected! BLG355's Avatar
    Join Date
    Feb 2014
    Location
    Elizabethtown, PA
    Age
    41
    Posts
    220
    Quote Originally Posted by Woods View Post
    Awesome, did not know about that feature. Had been wanting to do something like that.
    Same here! This works awesome!


    BLG
    My Build: 95 K1500, 355ci w/ OEM roller setup - zero decked, Eagle steel crank, Scat bushed H-beam rods, Speed Pro 2V flat top pistons - Rotating assembly balanced. Dart 165cc Iron Eagle S/S heads - 72cc chambers - 1.94 / 1.50 valves. Isky roller cam - 204/209 dur @ .050 - .480/.496 lift with Comp Magnum 1.6 rockers, Edelbrock 3704 intake - Bored to 52mm - 454 throttle body, Delco EP381 fuel pump @ 18 psi running through 80# 454 injectors. Hedman Headers into 3" Dynomax exhaust.

Similar Threads

  1. WTB pass side TPI serpentine bracket
    By mtrhead in forum Buy - Sell - Trade - Wanted
    Replies: 3
    Last Post: 09-12-2014, 05:29 PM
  2. copypng tables
    By ony in forum TunerPro Tuning Talk
    Replies: 8
    Last Post: 07-14-2013, 04:40 AM
  3. Connector for 5 pin side of ignition module???
    By Blazer3664 in forum GM EFI Systems
    Replies: 0
    Last Post: 05-29-2013, 04:47 AM
  4. Replies: 1
    Last Post: 09-21-2012, 02:34 PM
  5. ve tables on 16196395
    By droptopstng in forum GM EFI Systems
    Replies: 3
    Last Post: 02-08-2012, 07:27 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •