That would be the mask ID, which in my emulator was set to 0D instead of AA. I'll modify it to AA and try it again.
Maybe that was it, I just went over all my previous bins and all my modified bins have AA as mask ID while this latest one has OD as the mask ID. That could have been causing failures. Thanks I'll try that in the morning.
You are correct it is the mask ID that has to be changed to AA. Mark discusses it in this thread.
http://www.gearhead-efi.com/Fuel-Inj...al-time-tuning
Alright well I did the changes and I'll connect the g1 adapter and ostrich 2.0 again tomorrow morning and start it up hopefully it doesn't cause the 1 injector off condition again.
Bookmarks