Bringing TBI and Multi Port Fuel Injection to a New Level.     EFI Conversions and Tuning! Seattle to Portland! E-mail Tuning Consultant!
Results 1 to 5 of 5

Thread: $32b definition file

  1. #1
    Fuel Injected! ZEDRATED's Avatar
    Join Date
    Jul 2012
    Location
    Toronto, Ontario
    Age
    35
    Posts
    493

    $32b definition file

    Hi everyone. I'm looking for a detailed 32b definition file. How can I tune a $32b bin when there is such little detail in the logs with the definition file in tunerpro. Does anyone have a custom one that shows more parameters especially load, MAF, open/closed loop, and more?
    Thanks.

  2. #2
    Fuel Injected! ZEDRATED's Avatar
    Join Date
    Jul 2012
    Location
    Toronto, Ontario
    Age
    35
    Posts
    493
    Nobody?
    :-(

  3. #3
    Fuel Injected! steveo's Avatar
    Join Date
    Aug 2013
    Posts
    2,424
    the ads file i have contains open/closed loop, blm enable, airflow, cross counts, blm cell, knock count, rpm, coolant temp, throttle position... you have all those, right?

    thing is, with a 160 baud datastream, that's about all you get without flashing a new chip. the adx cant make things magically appear in the datastream. the ecu only sends out what it's configured to send out, and the datastream has to be small or the sampling rate just gets worse and worse..

    you want other info than what's provided? it can be done. you need to replace items in the bin's datastream configuration other known memory addresses, then modify your adx to match so things are converted and displayed properly.

    do you want help doing that?

    first you need to pick items you aren't using, and what to replace them with...

  4. #4
    Fuel Injected! ZEDRATED's Avatar
    Join Date
    Jul 2012
    Location
    Toronto, Ontario
    Age
    35
    Posts
    493
    Quote Originally Posted by steveo View Post
    the ads file i have contains open/closed loop, blm enable, airflow, cross counts, blm cell, knock count, rpm, coolant temp, throttle position... you have all those, right?

    thing is, with a 160 baud datastream, that's about all you get without flashing a new chip. the adx cant make things magically appear in the datastream. the ecu only sends out what it's configured to send out, and the datastream has to be small or the sampling rate just gets worse and worse..

    you want other info than what's provided? it can be done. you need to replace items in the bin's datastream configuration other known memory addresses, then modify your adx to match so things are converted and displayed properly.

    do you want help doing that?

    first you need to pick items you aren't using, and what to replace them with...
    can u post that file?
    and is there anyway possible to get load while data logging? LV8 I believe it is called?
    Last edited by ZEDRATED; 09-28-2014 at 08:59 PM.

  5. #5
    Fuel Injected! ZEDRATED's Avatar
    Join Date
    Jul 2012
    Location
    Toronto, Ontario
    Age
    35
    Posts
    493
    Quote Originally Posted by ZEDRATED View Post
    can u post that file?
    and is there anyway possible to get load while data logging? LV8 I believe it is called?
    Nobody has a good definition file for $32b????

Similar Threads

  1. $32B definition file
    By ZEDRATED in forum GM EFI Systems
    Replies: 7
    Last Post: 09-03-2015, 01:42 PM
  2. '99 5.3 definition file?
    By BurgerWorld in forum OBDII Tuning
    Replies: 3
    Last Post: 12-19-2013, 09:14 PM
  3. 95 Monte Carlo definition file
    By volkerc in forum GM EFI Systems
    Replies: 11
    Last Post: 05-19-2013, 05:16 PM
  4. Connector definition for TPS and MAP
    By Mastiff in forum GM EFI Systems
    Replies: 2
    Last Post: 03-13-2012, 09:27 PM
  5. Olds Cutlass 1998 OBD2 Definition File
    By GMdriver in forum GM EFI Systems
    Replies: 1
    Last Post: 12-26-2011, 04:35 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •