Read my post above...
Read my post above...
The man who says something is impossible, is usually interrupted by the man doing it.
ok. I will try to do some logging tomorrow after switching the switch. :-)Originally Posted by Six_Shooter
1hz is actually what the data stream rate should be for a '7747. And yes, that's slow as hell :D
ALDLdroid author, Android application for ALDL ECU
https://play.google.com/store/apps/d...roux.aldldroid
Like us on Facebook
Visit the app's Website
its useable, but you need to do lots of very long logs and do averages and plotting with spreadsheets or whatever to get useful data. when i tuned my tbi ecm, i did hours of datalogging and spent hours on sorting that data into useable stuff, and running averages, etc.
yes and these ecu's that command locked timing and high idle rpm when in 10k mode need the bin edited before logging set dianostic mode forced advance rpm limit low like 900 rpm or all the blm data under the stock set point will be bad data normally 2000rpm limited
So I'm a little confused on what needs to be done while data logging. What parts of the cal need to be changed?
Thanks for the help guys
what are your goals? more stable idle? more precise fueling? more optimal timing advance?..
Posting Permissions
Reply With Quote
Bookmarks