Can someone tell how to calculate the correct equation in my ADX editor for mph? When monitoring or logging, my mph displayed is about 2/3 of that of my actual speed.
TunerPro Rt
ECM 1227727
$A1
Can someone tell how to calculate the correct equation in my ADX editor for mph? When monitoring or logging, my mph displayed is about 2/3 of that of my actual speed.
TunerPro Rt
ECM 1227727
$A1
I will prolly get laughed at here but, a hack way to do it is to add whats missing. If the reading is off in a linear slope it's easy. Say at 65mph is shown in data and actual mph is 60, same at 55,45,35,25, etc, just add 5 to the existing equation. I don't have that mask to look at but just as an example.. (vsspulse / 255) + 5 = X. In either case you can play around with the current equation to see if you can manipulate it to show the correct mph.
Buddrow
If it don't fit force it, if it don't force fit f&%@ it!
Bookmarks