Results 1 to 4 of 4

Thread: 7060 VSS Questions

  1. #1
    Carb and Points!
    Join Date
    Nov 2012
    Posts
    8

    7060 VSS Questions

    OK folks, here's the background info: http://www.gearhead-efi.com/Fuel-Inj...lp-the-new-guy!

    I'm looking to take advantage of the speed-related advantages (although small) of fuel cut, lean cruise, etc. that the 7060 has to offer.

    So I am running the 7060 PCM and have a couple of VSS-related questions:
    1. Has anyone developed a BIN which allows the input VSS pulses to be adjusted? See pic: http://i116.photobucket.com/albums/o...ngesforVSS.jpg
    2. If not, does anyone have a recommendation on adding a 40 pulse per minute setup (Hall/VR sensor) to my truck? I've browsed around Jags That Run website, but I don't see an option for a differential-mounted toothed wheel setup for a 14 bolt rear end...just a reminder, my 700R4 is NOT the 4L60E, it's original off of the 86 GMC, so I'm not sure I can add a relucter ring without doing some (semi)major modifications to the tranny.


    Keep in mind, I have the 2-pulse optical buffer behind the cluster, so my though is if I can adjust the vss ppm in TunerStudio then theoretically I can just use that for my speed signal.

    Thoughts?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    Here is an idea, see attached pictures.

    dave w
    Attached Images Attached Images

  3. #3
    Carb and Points!
    Join Date
    Nov 2012
    Posts
    8
    Quote Originally Posted by dave w View Post
    Here is an idea, see attached pictures.

    dave w
    That is the concept I'm referring to, but it would need to be for a GM 14 bolt yoke (not sure if the one in the pic is the same)...http://www.billavista.com/Tech/Artic...s/DCP_9329.jpg

    I have CNC access and could have one made, so I'd need dimensions and/or CAD drawings for the wheel...unless someone sells the wheel and mounting bracket as a kit. I guess the bracket wouldn't be too difficult to fab up.

    Any input on adjusting the ppm in TunerPro? Updated BINs?
    Last edited by seads505; 09-10-2014 at 05:32 PM.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    I don't have access to a GM 14 bolt rear end. I can do the CAD, I would need the yoke measurements.

    I can't help on adjusting the ppm in TunerPro.

    dave w

Similar Threads

  1. 7060 guys, in here!
    By 1BadAction in forum GM EFI Systems
    Replies: 35
    Last Post: 11-29-2014, 04:10 PM
  2. 7060 TCC Hysteresis?
    By 1BadAction in forum GM EFI Systems
    Replies: 9
    Last Post: 12-08-2013, 07:18 AM
  3. 7060 MPFI Conversion?
    By 1BadAction in forum GM EFI Systems
    Replies: 4
    Last Post: 04-27-2013, 01:50 AM
  4. Need a 7060 AND Prom
    By 1BadAction in forum Buy - Sell - Trade - Wanted
    Replies: 4
    Last Post: 04-18-2013, 04:00 AM
  5. Replies: 3
    Last Post: 07-28-2012, 05:10 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •