Results 1 to 8 of 8

Thread: Issues getting bin data to display correctly in TPRT

  1. #1
    Fuel Injected!
    Join Date
    Sep 2013
    Location
    Tulsa, Ok
    Age
    48
    Posts
    457

    Issues getting bin data to display correctly in TPRT

    Hey guys,

    Working on the XDF for my trans controller project and having a little issue displaying the data properly. Not sure(but likely is) if it's my fault in the code or how Ive set up the XDF but I have tried several ways. Anywho, when I open a table, say 1-2 shift MPH vs TPS%, instead of the value showing up on one line, 20% throttle = 18MPH, the "1" is on one line and the "8" are on the next line down. I have tried viewing as hex, integer, float, and ASCii and it always separates the value for some reason. Anyone have any ideas?

    Thanks in advance,

    Buddrow
    If it don't fit force it, if it don't force fit f&%@ it!

  2. #2

  3. #3
    Fuel Injected!
    Join Date
    Sep 2013
    Location
    Tulsa, Ok
    Age
    48
    Posts
    457
    I'll try later after I get home. THX

    Buddrow
    If it don't fit force it, if it don't force fit f&%@ it!

  4. #4
    Super Moderator
    Join Date
    Mar 2011
    Location
    Camden, MI
    Age
    35
    Posts
    3,026
    1 on one line and 8 on the next sounds like you have it set to display 8 bit values when it should be doing 16?
    1995 Chevrolet Monte Carlo LS 3100 + 4T60E


  5. #5
    Fuel Injected!
    Join Date
    Sep 2013
    Location
    Tulsa, Ok
    Age
    48
    Posts
    457
    Robert,

    When I change the xdf settings to 16 bit the cell is blank, same thing when I try 32 bit. The cell only shows the correct value when set as an ASCii character, although it staggers them as I stated earlier. Im lost at this point and this is the biggest hurdle I have left to finish this thing software-wise. I'm hesitant to post my source but will post the xdf.

    Buddrow
    Attached Files Attached Files
    If it don't fit force it, if it don't force fit f&%@ it!

  6. #6

  7. #7
    Fuel Injected!
    Join Date
    Sep 2013
    Location
    Tulsa, Ok
    Age
    48
    Posts
    457
    Quote Originally Posted by steveo View Post
    you should post the bin associated with this xdf or theres' no way to figure this out.....
    You asked me to post the xdf.

    Buddrow
    If it don't fit force it, if it don't force fit f&%@ it!

  8. #8
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,008
    it displays just fine for me when displaying random gibberish so i need to see your bin to find out why it's not working for you

Similar Threads

  1. 2 1/16 gauge ECM data display
    By 3400tZ in forum Other EFI systems and related topics
    Replies: 83
    Last Post: 09-03-2015, 05:38 AM
  2. Dash & Data List Views issues
    By Ardent_Z28 in forum TunerPro Tuning Talk
    Replies: 11
    Last Post: 08-14-2013, 05:21 AM
  3. 88 fiero not connecting to TPRT.
    By Playtoy_18 in forum TunerPro Tuning Talk
    Replies: 5
    Last Post: 08-01-2013, 06:03 AM
  4. having data trace issues
    By carcaper in forum TunerPro Tuning Talk
    Replies: 10
    Last Post: 05-07-2012, 03:33 PM
  5. Can not get PCM bins to display correctly
    By JeepsAndGuns in forum GM EFI Systems
    Replies: 32
    Last Post: 09-20-2011, 02:45 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •