Results 1 to 11 of 11

Thread: intro

  1. #1
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6

    intro

    hello i have two vehicles that use tbi and would like to learn how to tune their computers from reading up in this forum. i have an 88 k5 blazer (obviously) and a 92 1500 single cab step side. both have 350's and 700r4's. my blazer has an RV cam, flat top pistons, headers, 1.6 roller rockers and a 6 in lift on 33's with 4.56 gears and a posi in the back but the best part is its sweet new blue and white paintjob. my 92 is all stock but i just ordered exhaust for it so its a start.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264


    I think the best place to begin tuning is coming up to speed with TunerPro RT. Feel free to ask questions.

    dave w

  3. #3
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6
    are there any good tutorials out for tunerpro? my biggest issue is that i bought the aldl to bluetooth adapter from reddevilriver and i havent been able to figure out how to get it to work with tunerpro. i got it to connect to aldldroid on my phone but thats as far as ive gotten. it asked me which .adx file i have and i havent been able to figure out what an adx file is or which one i should choose. i guess i have a lot of learning to do. the one ive been playing around with the computer with is my 92 being that my blazer is currently in storage. i will break her out for winter and play with its computer then.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    I'm almost 100% sure the 88 Blazer is using ECM 1227747. ( Lots of information on the 1227747 here: http://www.gearhead-efi.com/Fuel-Inj...Information-42 ) There is more than one ECM option for 1992. Maybe the 1992 has ECM 16146299? ( http://www.gearhead-efi.com/Fuel-Inj...Information-99 ) Post back the ECM number for the 1992, I should be able to help with the .adx file.

    dave w

  5. #5
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6
    I guess the most reliable way would be to take out the glove box and check. Where would the number be? On the chip itself?

  6. #6
    LT1 specialist steveo's Avatar
    Join Date
    Aug 2013
    Posts
    4,002
    there will be a sticker on the ECM with a GM part number for the ecm itself, and a sticker on the chip (under a small cover) that says the stock calibration ID (which you can use to figure the mask). you want both.

  7. #7
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6
    Alright the sticker on my 92 says it's 16146299. Still trying to figure out how it comes out to figure out the number on the chip

  8. #8
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6
    It was a lot easier than I thought to remove. The sticker on the chip says awlb awlb 7706
    Last edited by 88k5blazer; 09-09-2014 at 01:18 AM.

  9. #9
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264
    I've attached $99 .adx and $99 .xdf files for ECM 16146299.

    dave w
    Attached Files Attached Files

  10. #10
    Carb and Points!
    Join Date
    Aug 2014
    Posts
    6
    Thanks for the help. Which should I choose when aldldroid prompts me to choose an .adx file? it gives me 3 options. 8EA.adx, 8F.adx, and A1.adx.

  11. #11

Similar Threads

  1. Intro
    By k1500 in forum Introductions
    Replies: 2
    Last Post: 06-24-2013, 06:48 PM
  2. Mandatory Intro
    By FSJ Guy in forum Introductions
    Replies: 5
    Last Post: 12-09-2011, 05:10 AM
  3. Intro
    By cmaje72 in forum Introductions
    Replies: 2
    Last Post: 08-03-2011, 05:37 AM
  4. new guy intro
    By Hilander in forum Introductions
    Replies: 1
    Last Post: 06-01-2011, 04:45 AM
  5. Intro
    By RobertISaar in forum Introductions
    Replies: 1
    Last Post: 03-15-2011, 06:03 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •