LT1 bin file for E85 fuel.

[pema]

Dear forum members, Im a new member here but have been reading here a lot, thanks for all useful info.
I have put a camaro 1994 LT1 350 V8 controlled by a pontiac PCM and a Buick roadmaster 4L60e tranny into my old 1984 gen 3 camaro, everything fits fine just bolts on without problems and works nice, here in sweden a 1984 camaro is seen as old red neck ferrari and does not draw same attention from authorities as a shiny sports car. As Im also building a house and had a second child late december my late evenings in the garage is now easily counted so I now kindly ask if someone has a bin file to the LT1 for ethanol e85 that could be sent or posted here ? Im hoping to save time by modifying something allready working. My long term goal is to have the lt1 supercharged but I have to take small steps as my time is divided to a 1956 fairlane with a -89 302 efi and a suzuki tl 1000 V-twin, also EFI =0).

By the way, the caddy vp4 bin file with towing option posted here seems to be slow in lock up ? I was thinking with towing option the lock up would be activated right after gear shift ?....or maybe its time looking for another tranny...again.

Kindly Peter.

[steveo]

since the stoich constant hasnt been confirmed in $EE... you can just bork your injector constant.

since e85 is 9.765:1 vs stock stoich 14.7:1, you can just take your stock injector constant and multiply it by 0.664.

that should put you in the right ballpark.