Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: LT1 8051 tip-in lean? Anybody had success curing it?

  1. #16
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    Huntsville, AL
    Posts
    237
    Just to close out this thread, it turns out that TunerCat 2.26 or 2.27 had the transient fuel flag mapped as one of the PASS-KEY flags (I forget exactly which one). I found it by accident when using TunerPro to do a diff against a stock GM file, and in TunerPro, the bit location (12028) was mapped to two functions. Looks like it's resolved in TunerPro $EEX v. 3.6 as of late 2015, but just for posterity's sake I'm posting on this thread.

    It makes me wonder how many highly modified LT1 cars ended up with aftermarket engine management over the years because they turned off something labeled as VATS but was actually transient fuel and caused nasty tip-in leans...

  2. #17
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    heres a ee xdf with alittle bit more stuff in it than eex. Use at your own risk. still lots of stuff to figure out.

    http://www.gearhead-efi.com/Fuel-Inj...ll=1#post55902
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

  3. #18
    Fuel Injected!
    Join Date
    Sep 2012
    Location
    Huntsville, AL
    Posts
    237
    Wow, I'm just blown away. Incredible work!

  4. #19
    Fuel Injected!
    Join Date
    Mar 2013
    Posts
    1,469
    For the tip-in you can try change values of this table "1240a airflow adder to value calculatd from maf VS RPM"
    defined in the xdf. It adds airflow to maf value so it must be adding fuel that way.
    Each line corresponds with different conditions map and rpm related (12406-12409 define the thresholds)
    above 80 kpa and 2000 rpm use the last line 9, above 80kp and rpm between 900-2000 use line 8.
    The value is some sort of multiplier so use cautiosly up or down and see how it reacts.

  5. #20
    Fuel Injected! jthompson122183's Avatar
    Join Date
    Jun 2014
    Location
    ohio
    Posts
    185
    ^thats the person you should be thanking i used his t and e side map.txt from the $EE Disection thread. i just did the grunt work of putting it in the xdf. some of that stuff still needs figured out like conversions.
    97z28 A4 obd1 swap(16188051)
    Tunerpro Newbie

Similar Threads

  1. lean cruise
    By bonnieclyde100 in forum GM EFI Systems
    Replies: 4
    Last Post: 09-12-2014, 11:16 AM
  2. 8051 lt1 mode 4 commands
    By kur4o in forum GM EFI Systems
    Replies: 2
    Last Post: 06-08-2014, 09:33 PM
  3. LT1 8051 dual wideband into PCM?
    By sherlock9c1 in forum GM EFI Systems
    Replies: 1
    Last Post: 05-29-2014, 05:37 AM
  4. My tbi conversion was a success!
    By Shawn1989 in forum GM EFI Systems
    Replies: 15
    Last Post: 05-09-2014, 02:24 AM
  5. Curing GM EFI Vertigo?
    By 1project2many in forum GM EFI Systems
    Replies: 14
    Last Post: 01-02-2012, 02:03 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •