need some insight on a technical issue i have

[RRice]

Idle VE vs. MAP vs. RPM? that's the only thing i can find that's even close to what you mentioned

[RRice]

ok i got all my issues solved.. the data error was caused by the default setting in device manager for the com port being 9600 .
after changing it to something higher than that it works fine now with no errors.

I got my idle BLM to stay at 126 in open loop..RPM eventually makes it was down to about 700 or so.. i can live with that for now.

Now i just need to figure out how to make tuner Pro work with a printer port..if it's even possible that is lol

thanks everyone for ya help and idea's..it was all helpful in finding and resolving the issues