Has anyone done the dent removal in these? mine are not too bad, but i want to make everything real nice, and maybe do some porting while i have the TBI running the truck.
Has anyone done the dent removal in these? mine are not too bad, but i want to make everything real nice, and maybe do some porting while i have the TBI running the truck.
Are you talking about the indents for the factory bolts, or removing actual dents in the tubes? I've removed dents before using wooden dowels groun to fit the tube.
I read something awhile ago about knocking a golf ball through them?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
1978 Camaro Type LT, 383, Dual TBI, '7427, 4L80E
1981 Camaro Z-28 Clone, T-Tops, 350/TH350
1981 Camaro Berlinetta, V-6, 3spd
1974 Chevy/GMC Truck, '90 TBI 350, '7427, TH350, NP203, 6" lift, 35s
Nope, it has dents in the runners from when it was on the donor car. I ordered my balls yesterday,$18 from mcmaster.com...Im going to need another lower intake as well, off to ebay!
Bookmarks