EFI Fuel Pump Upgrade

[gregs78cam]

Website version with assembly pictures at:
http://www.gearhead-efi.com/gm-ecm-p...onversion.html

If you have a vehicle that came with some type of EFI then this may only be a slight upgrade, but if you are doing a conversion then this is really the only way to go in my opinion.

Through looking for part numbers, I found that there are many different height units. It very well may be possible to find a module that fits your tank height with out modification. But I would recommend only using one that has the siphon jet, be sure to check as some don't.

I have done this to both my '78 Camaro and my '74 K10 Truck. They both work great. Enjoy. Sorry I had to .zip them, it was the only way to fit them on the forum.

Part 1 Module modification
Part 2 Tank modification

[EagleMark]

Nice work Greg!

Thanks for sharing!

[gregs78cam]

Thanks, I am just glad to be able to contribute.

[93V8S10]

Nice Work!!

[EagleMark]

Remind me after the game to unzip this and I will build an HTML webpage for the writeup. We will use it for a link from the BCCFind webpages... it's such a sweet deal it should be in web format, I can then post it here in forums to so it can be read and still download the files.

[gregs78cam]

Thanks.

Run with it Mark.