with later lean cruise code, it requires highway spark to start getting added in before it will lean out the AFR, is that the case with $42? and is there any highway spark in these BINs?
with later lean cruise code, it requires highway spark to start getting added in before it will lean out the AFR, is that the case with $42? and is there any highway spark in these BINs?
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
There is but it just kicks in the same time IIRC? Not like the Camaro...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
just something to watch out for then..... when i first jumped in, i had highway fuel enabled but it never happened, took me a few days before i found out that if the highway spark table was set to 0, highway fuel never happened. stupid little things like that is why i got interested in learning how to make sense of the 6811 instruction set.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
I will move the MPH up and burn a new chip. Not sure why that code popped up...must have a bad chip. Live and Learn and always fall forward...
Jason
1987 Silverado V-10 TBI
Goodwrench 350 260hp/350tq motor
3.08 gear 400 trans
Moates Tuning Equip
TunerPro Software
Level, Plumb, and Square
Cleared the codes and burned a new chip...I still do not see any indications that the Hi-Way Lean is enabling. I need some help and/or directions.
I attached the bin and log for you to review
Jason
1987 Silverado V-10 TBI
Goodwrench 350 260hp/350tq motor
3.08 gear 400 trans
Moates Tuning Equip
TunerPro Software
Level, Plumb, and Square
post your bin file and I will see if I can help you.
Posting Permissions
Reply With Quote
Bookmarks