Unknown PROM reading question

**EDZIP** · 07-02-2014

Just picked up a Moates adapter with a prom on it. Need the adapter..but curious as to what the bin is tailored to..owner didn't know.

Tried reading it via FlashnBurn to TunerProRT..but not sure where I'm going wrong.

The bin may be attached....

**steveo** · 07-02-2014

http://m.summitracing.com/parts/mvc-7777

cripes.. whatever it is it better be awesome for that kinda money..

**EDZIP** · 07-02-2014

Originally Posted by steveo

http://m.summitracing.com/parts/mvc-7777

cripes.. whatever it is it better be awesome for that kinda money..

Trust me got a super deal on the adapter which are normally $40...the prom was free. But from your link looks like a GM truck ecm?

**EagleMark** · 07-02-2014

Didn't read right, it's all blank?

**RobertISaar** · 07-02-2014

i'm also seeing a completely blank file.

**EDZIP** · 07-02-2014

Originally Posted by EagleMark

Didn't read right, it's all blank?

Mark..what parameters should I use to copy it with Flash n Burn? ie don't know chip size without tearing off the label.

**EDZIP** · 07-03-2014

Think I got it this time..attached.

**RobertISaar** · 07-03-2014

it's actually a 16KB BIN, the code is repeated 4 times throughout the BIN. it also has a mask ID of $32, so some kind of 86-88 5.0 or 5.7TPI application.

**RobertISaar** · 07-03-2014

more info: definitely 32B, so 87-88 TPI, they changed the PROMID, so finding out what it was based off of will require comparing to every known 32B calibration and seeing which one most closely matches it.

here is the chopped down version.

**EDZIP** · 07-03-2014

Originally Posted by RobertISaar

more info: definitely 32B, so 87-88 TPI, they changed the PROMID, so finding out what it was based off of will require comparing to every known 32B calibration and seeing which one most closely matches it.

here is the chopped down version.

Thanks..nothing I need but good to know..Thanks all!